Jesse J
Tool review • 06/06/2025
“Tool worked great, and the chat support was lightning fast when I had a question. Very happy with the purchase.”
Find the right BRP diagnostic kit
Answer a few questions and we’ll recommend the correct software + required MPI device.
- ✓ Works for Ski-Doo/Lynx, Can-Am, Sea-Doo and Rotax boats
- ✓ Instant recommendation based on vehicle year and type
- ✓ Pick optional interfaces (Power / DESS) directly in the results
⚡ Fast support
🔒 Secure checkout
✅ Correct combination
1) Vehicle type (select all that apply)
2) Vehicle year range
Enter the oldest and newest model year you need to cover. This works for unlimited vehicles - only the year range matters for choosing the correct kit. If you only need one model year, enter the same year in both fields.
Recommended kit(s)
Need help? Contact us
Compatibility overview
Compare coverage by vehicle type and model year.
BUDS3 diagnostic kit
Current + future coverage.
| Software | Sea-Doo | Can-Am Off-Road | Can-Am On-Road | Ski-Doo & Lynx | Can-Am Motorcycles | Rotax JTS boats (Scarab, Chaparral, Williams, …) |
|---|---|---|---|---|---|---|
| BUDS3 | 2017-> | 2017-> | 2017-> | 2017-> | 2025-> | 2017-> |
Note: Coverage is expected to grow over time (for example with EV platforms), so BUDS3 is the most future-proof option.
BUDS / BUDS2 diagnostic kit
Best for older vehicles and BUDS2 range.
| Software | Sea-Doo | Can-Am Off-Road | Can-Am On-Road | Ski-Doo & Lynx | Rotax JTS boats (Scarab, Chaparral, Williams, …) |
|---|---|---|---|---|---|
| BUDS2 25.0.0. | 2017-2025 | 2017-2025 | 2017-2025 | 2017-2026 | X |
| BUDS ALL PRODUCTS E3.8.2 | 2006-2016 | 2005-2016 | 2006-2017 | 2006-2016 | X |
| BUDS L3.3.0 | <- 2006 | <- 2005 | X | <- 2006 | X |
| BUDS PowerPack P3.9.X | X | X | X | X | 2006-> |
Tip: If you work with multiple vehicle types in a workshop, consider All-dealer or MegaTech license options.
What you get
A quick overview of what’s included with each diagnostic kit. Exact contents may vary by configuration.
Classic platform
BUDS / BUDS2
For older vehicles. It supports vehicles made between 2002 and 2025.
- ✓ BUDS / BUDS2 Software license
- ✓ MPI-3 communication device
- ✓ Diagnostic cable
- ✓ Support for selected vehicle platform(s)
- ✓ Unlimited updates
- ✓ Access to customer area (Manuals, special tools, etc.)
- ✓ Option to add Power / DESS interfaces if needed
- ✓ 24 Months warranty
Tip: If your selection includes multiple vehicle types, choose Dealer Technician or Mechatronic Expert license to cover all platforms.
Newest platform
BUDS3
For 2017 and newer vehicles (and expanding support over time).
- ✓ BUDS3 Software license
- ✓ V800 communication device
- ✓ Diagnostic cable
- ✓ Support for selected vehicle platform(s)
- ✓ Unlimited updates
- ✓ Access to customer area (Manuals, special tools, etc.)
- ✓ Option to add Power / DESS interfaces if needed
- ✓ 24 Months warranty
If your year range crosses 2016/2017, the finder may recommend both kits so you’re covered.
Need help choosing? Use the finder and we’ll generate the correct configuration link automatically.
Dealer Technician vs Mechatronic Expert
See which functions are available depending on the license type.
xSupported
| BRP BUDS Diagnostic kit | All-dealer / Dealer Technician License | MegaTech / Mechatronic Expert License |
|---|---|---|
| General Information | ||
| Change customer name | x | x |
| Reset Maintenance Warning | x | x |
| Reset trip hours | x | x |
| Reset Trip distance A | x | x |
| Reset Trip distance B | x | x |
| Change Model number | x | |
| Change Engine number | x | |
| Change VIN number | x | |
| Keys | ||
| Erase Key | x | x |
| Add Learning/Performance/Work key | x | x |
| Add Normal key | x | x |
| Enabling/Disabling DESS | x | |
| Installing Secure Code | x | |
| Change Key type without reprogramming key | x | |
| Settings | ||
| Throttle position sensor | x | x |
| Gear position sensor | x | x |
| Tire Size | x | x |
| ECM initialization | x | x |
| Change cluster language | x | x |
| Change cluster units | x | x |
| Change cluster mode (normal/racing) | x | x |
| Change Cluster Pointer Speed Position | x | x |
| Change Cluster Pointer RPM Position | x | x |
| Change Total Hours | x | |
| Setting Dynamic Power Steering (DPS) | x | x |
| Torque Adjustment | x | x |
| Change vehicle Configuration | x | |
| Enabling/disabling vehicle Option (DPS, Air Suspension, Belt protection, With fan, Electromechanical reverse, ...) | x | |
| VCM Bleeding Front/Rear Circuit | x | x |
| VCM Reset Steering Angle Sensor | x | x |
| VCM Reset Yaw Rate Sensor | x | x |
| Edit curves for E-Tec Engines | x | |
| Monitoring | ||
| Engine speed | x | x |
| Engine RPM | x | x |
| Intake PSI | x | x |
| TPS | x | x |
| TAS | x | x |
| Gear position | x | x |
| Battery voltage | x | x |
| Engine temperature | x | x |
| GPS Position | x | x |
| iBR Gate position | x | x |
| iBR Target position | x | x |
| iBR BRLS Lever | x | x |
| Cylinder monitoring | x | x |
| Exhaust temperature | x | x |
| Oxygen Sensor Status | x | x |
| Low Oil Pressure | x | x |
| IACV Position | x | x |
| Fuel and Ignition | x | x |
| Atmospheric Pressure PSI | x | x |
| Intake Air | x | x |
| Engine Mode | x | x |
| Dynamic Power Steering | x | x |
| Cluster Lamp Activity | x | x |
| Cluster WOW | x | x |
| VCM Front / Rear Wheel Speed Sensor | x | x |
| VCM Lateral Acceleration | x | x |
| VCM Yaw Rate Sensor | x | x |
| VCM Steering Angle Sensor | x | x |
| ACS Position Sensor | x | x |
| ACS Switch Input | x | x |
| THCM Tuned Pipe | x | x |
| THCM Muffler | x | x |
| Activations | ||
| ECM Fuel Pressure Relief | x | x |
| ECM Fuel Pump | x | x |
| ECM Cooling Fan | x | x |
| ECM Battery Relay | x | x |
| ECM Oil System Bleeding | x | x |
| ECM Storage | x | x |
| Cluster WOW Test | x | x |
| Cluster Buzzer Test | x | x |
| Cluster Heater Handle | x | x |
| Cluster Heater Thumb | x | x |
| SCM Steering Assembly Validation | x | x |
| SCM Compressor | x | x |
| SCM Front / Rear Valve | x | x |
| SCM Shock Absorber Pressure (High Pressure) | x | x |
| SCM Auxiliary Line Pressure (Low Pressure) | x | x |
| iBR Position Test | x | x |
| IS Position Test | x | x |
| TCM Activation | x | x |
| TCM Gear Position | x | x |
| TCM Routine | x | x |
| ACC Suspension Up / Down | x | x |
| ACC Reverse Actuator | x | x |
| ACC Reverse Back Light | x | x |
| Faults | ||
| Summary (Code, State, Module, Count, Total Time, Description) | x | x |
| Clear Occurred Faults | x | x |
| All / Active / Occurred Faults | x | x |
| Possible Causes | x | x |
| Service Actions | x | x |
| Faults Conditions (Speed, TPS, Intake PSI, Engine temp, Battery, Engaged Gear, ...) | x | x |
| History | ||
| Min. / Max. (RPM, Intake PSI, Intake Temp, Engine temp, Battery voltage) | x | x |
| Runtime in % (Normal / Limp Mode) | x | x |
| Runtime in Minutes (Normal / Limp Mode) | x | |
| RPM Profile in % | x | x |
| RPM Profile in Minutes | x | |
| Speed Profile in % | x | x |
| Speed Profile in Minutes | x | |
| Last Minute (RPM & Throttle Opening, Engine Temp, Intake Pressure, History Table) | x | x |
| Modules | ||
| ECM (Information & Update) | x | x |
| Cluster (Information & Update) | x | x |
| DPS (Information & Update) | x | x |
| IBR (Information & Update) | x | x |
| IBRMon (Information & Update) | x | x |
| IS (Information & Update) | x | x |
| VCM (Information & Update) | x | x |
| TCM (Information & Update) | x | x |
| IS (Information & Update) | x | x |
| THCM (Information & Update) | x | x |
| Clear History on Modules | x | |
| Cleaning Modules as New | x | |
| Advanced Functions in Modules | x | |
Note: The table is a simplified comparison. Exact functions can vary by model and software version.
Trusted by BRP owners worldwide
Fast shipping, easy setup, and support that actually answers.
5.0
from real customers
Harry Savell
Sea-Doo Scanner • 04/15/2025
“I use professional bi-directional scanners daily—this performs right up there with the tools in my shop. Love that it’s available to the public, not only dealers.”
TC SMALL ENGINE
Rock Solid • 11/09/2024
“I’ve worked with the OEM setup. The hardware quality here is excellent and the software feels identical. Rock-solid kit.”
Omar Garcia
Great Diagnostic Tool • 05/12/2025
“Excellent tool—easy to use and gives you all the access you’ll ever need. Shipping was very fast to Orlando.”
Roger
2016 Can-Am Maverick 1000R • 01/28/2025
“Works great on my Can-Am. No more dealer trips just to clear codes.”
Stefan
Great support & fast delivery • 01/07/2025
“Arrived in 2 days. Had a small registration issue and support replied quickly—highly recommend.”
Bernard D
Outstanding product • 07/25/2022
“Installation is straightforward. The USB wizard walks you through everything step-by-step, including activation. Well packed and delivered fast.”
William L
Long time customer • 03/22/2024
“Great product—and even better support. You can tell the team genuinely cares about what they ship and how you use it.”
FAQ: Frequently asked questions
FAQ: Quick answers to the most common questions about compatibility, licenses, and add-ons.
Use the finder above and enter your vehicle year (or year range). As a rule:
- Up to 2016 → BUDS / BUDS2 diagnostic kit (MPI-3).
- 2017 and newer → BUDS3 diagnostic kit (V800).
- If your range crosses 2016/2017 → you’ll see both options.
Both work for diagnostics, reading/clearing faults, and common service functions. Mechatronic Expert / Megatech includes additional advanced programming and configuration features.
See the full comparison in the license section above.
Not always. Some vehicles and procedures require additional interfaces. If you’re unsure, select the add-ons in the results and we’ll match the correct combination.
- Power interface — Required for vehicles without battery & recommended for updates & longer diagnostic times.
- Needed for programming DESS keys on certain SeaDoo & Skidoo models made between 2008–2012.
Yes. If you select multiple vehicle types in the finder, you’ll be asked to choose a workshop license type (All-dealer or MegaTech) that covers multiple platforms.
If you’re unsure, select the closest year range and your vehicle type(s). If the finder shows both options, choose based on the newest vehicle you need to support.
Still unsure? Contact support and we’ll help you confirm compatibility.
Yes. BUDS3 is the newest platform and is expected to grow over time with newer BRP platforms and updates.
Can’t find your answer? Contact support and we’ll reply quickly.
Contact support